| Tack Surface Options - |
• Claridge Cork
• Fabricork
• Hook-Fab
• Designer Fabric
• Tan Nucork
|
Writing Surface Options -
(for Type BR/BL, C, D, ER/EL, F, GR/GL and H Combination Units) |
• LCS Porcelain Enamel Steel
Markerboard
• Vitracite Porcelain Enamel Steel
Chalkboard |
| Features - |
• Aluminum trim all four sides.
• Map Rail and/or Chalktrough optional
on Type CO and Combination Units.
|
| Standard Trim Finish - |
Satin Anodize Aluminum (Color Anodize and Powder Coat Finishes optional) |
| O.A. Panel Thickness - |
Approx. ½" O.A. |
| Max. Height - |
4'0" |
|
|
Typical Markerboard, Chalkboard & Tackboard Arrangements:
Type CO |
Type ER (Tackboard on Right) - Type EL (Tackboard on Left) |
Type BR (Tackboard on Right) - Type BL (Tackboard on Left) |
Type F |
Type C |
Type GR (Tackboard on Right) - Type GL (Tackboard on Left) |
Type D |
Type H |
Select from Series 1, 3, 4, 4RC, 5, 185, and Modular Units:
| Series |
 |
Trim Face |
Max. Length |
Method of Installation* |
|
| Series 1 |
1-1/2" |
16'0" |
Angle clip hangers, 2' on center, top and bottom |
|
| Series 3 |
1-1/4" |
16'0" |
Angle clip hangers, 2' on center, top and bottom |
|
| Series 4 |
5/8" |
16'0" |
Angle clip hangers, 2' on center, top and bottom |
|
| Series 4RC |
5/8" |
16'0" |
Angle clip hangers, 2' on center, top and bottom |
|
| Series 5 |
5/8" |
16'0" |
Steel mounting clips at top; angle clips at bottom, 2' on center |
|
| Series 185 |
1-1/2" |
16'0" |
Z-bar clips for top and angle clips for bottom, 2' on center. Note: Necessary 12" square, 1/2" duracore blocking pads furnished. |
|
| Modulars |
5/8" |
8'0" |
Special panel clips on the board fit into adjustable height, slotted aluminum single or double standards. |
|
| *Note: Installation using 16A Adhesive is recommended, except on Modulars. Screws or wall anchors not included. |
<< BACK TO TACKBOARDS
|
