HOW TO CLEAN AND MAINTAIN
CARE AND CLEANING INSTRUCTIONS
CLARIDGE BULLETIN BOARDS


CLARIDGE CORK
•     Wash with household soap or mild detergent to remove dirt and grime.  Rinse, remove 
      excess water and allow to dry.
•     Stubborn stains and soil such as hair oil, lipstick, colored crayon, tape marks, etc., 
      may be removed with cleaning fluids, alcohol or WD-40®.  (Always follow proper safety 
      procedures when using solvents.)
•     Abrasive and/or alkaline cleaners should be avoided.

TAN NUCORK
•     Soil may be removed by lightly sanding with a very fine sandpaper or by erasing with art gum.
•     We do not recommend washing.

FABRICORK
•     Washable, stain-resistant vinyl surface cleans easily with household soap, detergent or 
       non-abrasive cleanser.  Avoid harsh abrasives as they may cause dulling of the vinyl surface.

HOOK-FAB and DESIGNER FABRIC
•     Lint, dust and other particles that may adhere to the Hook-Fab surface or Designer Fabric 
      surface may be removed with a clothes brush or with a “tacky” surface, such as the back 
      side of cellophane tape.
•     Dirty spots may be removed with a sponge and a common household suds detergent or 
      Woolite®.  
•     Grease stains or wax crayons should be first spot-cleaned with a lighter fluid containing 
      naphtha to remove the solvent soluble matter.  Any remaining stain can then be removed by 
      shampooing, using a household upholstery cleaner.  
•     Do not over saturate Hook-Fab or Designer Fabric surface with too much water, detergent 
      or upholstery cleaner.  Doing so may cause damage to the backing under the fabric.

Claridge Products and Equipment, Inc.
P. O. Box 910 - 601 Highway 62-65 South
Harrison, AR 72602-0910
Phone: (870) 743-2200 Fax: (870) 743-1908
E-mail: claridge@claridgeproducts.com


Close Window