PART 1 - GENERAL

1.01	DESCRIPTION OF WORK
	A.	This section includes 390 Series Large Door Display Cases
		
1.02	REFERENCED STANDARDS
	A.	ASTM-E 84
	B.	ASTM B221

1.03 	SUBMITTALS
	A.	Shop Drawings:  Provide shop drawings for each type of 390 Series Large 
		Door Display Case required.
	B.	Product Data:  Provide technical data for materials specified.  Include 
		Material Safety Data Sheets, when applicable.
	C.	Samples:
		1.  Manufacturer's color charts
		2.  Composition samples of material and trim to illustrate finish, color 
		     and texture.

1.04 	OPERATION & MAINTENANCE
	A.	Include data on regular cleaning, stain removal, and precautions.

1.05 	REGULATORY REQUIREMENTS
	A.	Conform to applicable code for flame/smoke rating in tackboards in 
		accordance with ASTM-E 84.

1.06 	QUALITY ASSURANCE
	A.	Provide all items in this section as manufactured by:
		Claridge Products and Equipment, Inc. 
		Harrison, Arkansas  72602-0910
		Phone:  870/743-2200;  Fax:  870/743-1908

1.07	FIELD CONDITIONS
	A.	Field measure prior to preparation of shop drawings and fabrication to 
		ensure proper fit.  

1.08	WARRANTY
	A.	Submit a standard warranty, stating when installed in accordance with 
		manufacturer's instructions and recommendations, Claridge 390 Series 
		large door display cases are guaranteed for one year against defects 
		in materials and workmanship.  Guarantee does not cover normal wear and 
		tear, improper handling, any misuse, or any defects caused by vandalism 
		or subsequent abuse.  Guarantee covers replacement of defective material 
		but does not include cost of removal or reinstallation.

PART 2 - PRODUCTS

2.01 	MANUFACTURERS
	A.	390 Series Large Door Display Cases as manufactured by: 
		Claridge Products and Equipment, Inc., Harrison, Arkansas  72602-0910;  
		Phone:  870-743-2200;  Fax:  870-743-1908

2.02	MATERIALS
	A.	390 Series Large Door Display Cases
		1.	Select from Claridge Cork, Fabricork, Hook-Fab, Designer Fabric 
			and Tan Nucork tackable back panel.
		2.	Select from Walnut or Oak grained low-pressure laminate finish 
			back panel.
		3.	Standard sizes: 6'x6'; 6'x8'; 6'x10'; 6'x12'; 6'x14'; 6'x16'.  
			Special sizes on request.
		4.	Housing:  Perimeter trim is heavy gauge extruded aluminum with 
			3" face; inside case depth up to 24".  
	B:	Glass Doors:  3/16" Tempered glass doors, unless otherwise specified.
		1.	Sliding door cases have doors that slide on ball bearing rollers, 
			and are fitted with plunger-type locks
		2.	Three 6, 8, 10 or 12-inch wide (as specified) adjustable glass 
			shelves
		3.	Necessary brackets and shelf standards provided.
	C.	Metal Trim and Accessories:  Provide aluminum extrusions as manufactured by 
		Claridge Products and Equipment, Inc.  Trim shall be heavy gauge extruded 
		aluminum and shall meet or exceed ASTM B221 Alloy Standards.  Finish to be 
		etched and anodized satin finish.  
	D.	Colors:  As selected from manufacturer's standard colors.  Over 50 standard 
		tackboard colors to choose from.  Color charts furnished on request.
	E.	Wood Box:  (Optional) Specify depth (up to 24") and finish - walnut or oak 
		grained low pressure laminate.
		1.	Wood box furnished 16" deep unless otherwise specified.
		2.	Wood box shipped KD.
	F.	Options:  Color anodize or powder coat finish on trim; fluorescent lights
	
2.03	FABRICATION
	A.	Shop assembly: Provide factory assembled cases to requirements indicated on
		shop drawings.
	B.	Units shall be of dimensions shown in details and in accordance with 
		manufacturer’s shop drawings, as approved by architect.
		
PART 3 -  EXECUTION

3.01	PROJECT CONDITIONS
	A.	Verify before installation that interior moisture and temperature 
		approximate normal occupied conditions.
	B.	Verify that wall surfaces are prepared and ready to receive cases.

3.02	INSTALLATION
	A.	Deliver cases KD to be reassembled on job.  
	B.	Follow manufacturer's instructions for storage and handling of units before
		installation.  
	C.	Install level and plumb, in accordance with manufacturer's recommendations.

3.03	ADJUST AND CLEAN
	A.	Verify that all accessories are installed as required for each unit.
	B.	At completion of work, clean glass surfaces, back panels and trim in 
		accordance with manufacturer's recommendations, leaving all materials 
		ready for use.

Close Window