Cleaning Instructions for:
Tack Surfaces

Claridge Cork

Wash with household soap or mild detergent to remove dirt and grime. Rinse, remove excess water and allow board to dry.

Stubborn stains and soil such as hair oil, lipstick, colored crayon, tape marks, etc. may be removed with cleaning fluids, alcohol or WD-40®. (Always follow proper safety procedures when using solvents.)

Abrasive and/or alkaline cleaners should be avoided.

Tan Nucork

Soil may be removed by lightly sanding with very fine sandpaper or by erasing with art gum.

We do not recommend washing.

Fabricork

Washable, stain-resistant vinyl surface cleans easily with household soap, detergent or non-abrasive cleanser. Avoid harsh abrasives as they may cause dulling of the vinyl surface.

Hook-Fab and Designer Fabric

Lint, dust and other particles that may adhere to the Hook-Fab surface or Designer Fabric surface may be removed with a clothes brush or with a "tacky" surface, such as the back side of cellophane tape.

Dirty spots may be removed with a sponge and a common household suds detergent or Woolite®.

Grease stains or wax crayons should be first spot-cleaned with a lighter fluid containing naphtha to remove the solvent soluble matter. Any remaining stain can then be removed by shampooing, using a household upholstery cleaner.

Do not over saturate Hook-Fab or Designer Fabric surface with too much water, detergent or upholstery cleaner. Doing so may cause damage to the backing under the fabric.